IS316 Lesson Plan 2/18/2009

Packet Tracer Configuration



Check initial settings
· Check that
o BM2,M+BM4,BM6 have no fixed IP address – they obtain it from the Birmingham Server (Check DNS setting on the server).
o BM1,BM3, BM5, BM7 have fixed IP addresses in the 192.168.50.0 network.
o LV1 and LV2 are on the 192. 168.75.0 network.
· Check that all the PCs within a network can ping each other and the server on the network .
o BM1-7 and Birmingham server and 192.168.50.254 (on router) are pingable
o LV1, LV2 and Liverpool server are all pingable
· Check that you cannot ping from one network to the other
o Ping LV1 from BM7
o Check the time to live info!!!!!
· Now double click on the Liverpool server and click on the CLI (Command Line Interface)
Displaying Details of the router
Show Interface details
Router>enable
Router#show ip interface brief

Interface IP-Address OK? Method Status Protocol
Fastethernet0/0 Unassigned Yes Manual Administratively down down
Fastethernet0/1 Unassigned Yes Manual Administratively down down
Serial0/0 Unassigned Yes Manual Administratively down down
Serial0/1 Unassigned Yes Manual Administratively down down
Change the Router name
Router#configure terminal
Router(config) Hostname Liverpool
Liverpool(config)#
Configure Interfaces
Fastethernet interface
Liverpool(config)#Interface Fastethernet0/0
Liverpool(config-if)#ip address 192.168.75.254 255.255.255.0
Liverpool(config-if)#no shutdown

Serial interface
Liverpool(config-if)#interface serial0/0
Liverpool(config-if)#ip address 192.168.200.2 255.255.255.252
Liverpool(config-if)#no shutdown

View results
Liverpool(config-if)#exit
Liverpool(config)#exit
Liverpool#show ip interface brief

Interface IP-Address OK? Method Status Protocol
Fastethernet0/0 192.168.75.254 Yes Manual up up
Fastethernet0/1 Unassigned Yes Manual Administratively down down
Serial0/0 192.168.200.2 Yes Manual up up
Serial0/1 Unassigned Yes Manual Administratively down down

Check if connection between networks is now working
o Check that all interfaces are glowing green (connected and running)
o Using the simulation mode check you can send a packet from
o Birmingham router to Liverpool router
o LV1 to Liverpool router
o BM1 to Birmingham router
o LV1 to Birmingham router
o BM1 to Liverpool router
o BM1 to LV1
o Note you may need to send them a couple of times to check that they do work!

Now turn off the Liverpool server and do it all again!
o Watch it turn on in the CLI